EKO

EKO MOTO SUPER 2T is suitable for oil injection systems and for fuel-oil premixing systems (in a fuel:oil ratio up to 50:1, according to the manufacturer s instructions). Due to its composition with a low ash content, it protects against pre-ignition, while at the same time ensures cleanliness and reliable operation of the engine.

To maintain its effectiveness, it should be stored at temperatures lower than +30°C and higher than -11°C and exposure of the product to direct sunlight should be avoided. Under proper storage conditions, the shelf life of the product is 12 months. CAUTION! Do not use it as an oil additive. It is placed in the special tank and used for exhaust gas management.

EKO ANTIFREEZE is concentrated and needs to be diluted with deionized water before use. It provides effective antifreeze and antithermal protection, compatibility with elastomers, effective lubrication of the water pump, miscibility with antifreeze liquids of a similar type and stability in solutions with water of increased hardness. For effective anti-rust and anti-corrosion protection, EKO ANTIFREEZE must be used in a ratio of at least 33% by volume in water, while, depending on its dilution in higher percentages up to 50%, antifreeze protection is achieved at lower temperatures. It is recommended to change it every year and regularly check for supplements

Long-lasting anti-corrosion protection, as it contains virtually non-consumable additives of aliphatic acid technology. Increased change intervals of up to 5 years, resulting in time and cost savings and less waste. Reduction of damage to the thermostat, radiator and engine and excellent protection against cavitation, resulting in longer engine life. Compatible with water. Environmentally friendly. Compatible with rubber gaskets and piping. Compatible with all antifreezes of the same technology (OAT)

EKO ATF III PLUS exhibits high shear resistance, resulting in maintaining a strong lubricating film and excellent protection against wear even at extended operating intervals and excellent tribological characteristics, resulting in smooth gear changes and efficient power transmission. Recommended for applications requiring DEXRON II, DEXRON III and MERCON quality level (not suitable where DEXRON VI and MERCON V specifications are required).

Multi-grade gasoline engine oils